AC/DC multimeter measuring calliper
Clamp meter AC/DC
CLMPM-AC/DC-ACTIVE
Register now and access more than 125,000 products
Multimeter measuring calliper for measuring electrical and physical variables, encompasses the following functions:
- AC/DC voltage measurement
- AC/DC current measurement
- Resistance measurement
- Audible continuity testing
- Diode testing
- ZERO mode/delta calculation
- Peak function
- Automatic range selection
- Automatic switch-off
- Data storage
- True RMS measurement
High ease of use thanks to very good ergonomics and central rotary switch
Measurements of DC current strengths with automatic zero adjustment, i.e. differential measurements are possible for currents, voltages and resistances.
Batteries not included in scope of delivery.
Datasheets(X)
Electricians, electrical technicians and service providers
Measurements in electrical systems, switch cabinets and homes
Vehicle operations
Voltage and current measurements on batteries
Display | 6000 digits |
Enclosure diameter | 30 mm |
Min./max. current measuring range | 50 mA/AC-400 A/AC |
Min./max. current measuring range 2 | 100 mA/DC-400 A/DC |
Min./max. voltage measuring range | 0.05 V/AC-600 V/AC |
Min./max. voltage measuring range 2 | 0.3 V/DC-600 V/DC |
Min./max. electrical-resistance measuring range | 0.2 Ohm-600 Ohm |
Overvoltage protection category | CAT III/600 V |
IP protection class | IP 30 |
Length x width x height | 199 x 75 x 36 mm |
Battery designation | 1.5 V Micro AAA |
Number of rechargeable batteries/batteries | 2 PCS |
Last viewed
WNA 200 ear defenders With very good noise insulation properties and height-adjustable headband
Heat-shrink solder connector
Hook For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
O-ring, metric
Machine screw tap HSCo blue ring through hole DIN 371/376
Flexible bit holder
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Sheet metal nut, type 1
Countersunk head screw with hexagon socket ISO 10642, steel, strength class 10.9, zinc flake, silver (ZFSHL)
Cylinder saw, HSS bimetal Longlife & Speed HSCo8