3M Cubitron vulcanised fibre disc 982C
Vulcanised fibre disc 982C 3M Cubitron II
982C CUBITRONII FIBERSCH. P36 115X22
Register now and access more than 125,000 products
High removal rate and long service life
The triangular Cubitron II plates form an extremely sharp grinding surface.
Cost savings and more pleasant, ergonomic working
Much higher efficiency in the machining process.
High level of working comfort
Requires less printing.
New dimension of surface quality
Machines the surface cleanly and evenly.
High removal rates
Has a self-sharpening effect.
Cool sanding
Datasheets(X)
Removal and welding seam machining for steel working.
Diameter (Ø) | 115 mm |
Bore diameter | 22.23 mm |
Grid size | 36+ |
Max. rotation speed | 13300 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | 3M Cubitron II mineral ceramic grit |
Colour of disc | Red |
Adhesive base | All-synthetic resin |
Last viewed
O-ring, metric
1/4" multi-socket wrench insert bi-hex, multi profile
Simplex soft face hammer With steel housing
HSCo Multi Longlife machine tap for through holes DIN 371/376
Hexagon nut, low profile, with clamping piece (non-metal insert) fine thread DIN 985, steel I10I, zinc-plated, yellow chromated (A2C)
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
1-inch impact socket wrench insert hexagon, metric, short
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
Single wire seal (SEAL) For uninsulated cable connector