A/C Leak Sealant 4-in-1 with UV Dye
Air-conditioning sealant 4in1
SEAL-A/C-LEAKSEAL-UV-114G
Register now and access more than 125,000 products
Professional formulation
- Contains specially formulated o-ring/seal conditioner to stop the majority of air conditioning leaks at rubber hoses, gaskets, seals and ALL types of o-rings including HNBR, nitrile and neoprene.
- Contains ester oil to aid in compressor lubrication.
- Contains R-134a gas as a propellant to aid in dispensing the product.
- Does not contain polymers and will not harm A/C system components.
- For use in R-134a air conditioning systems only.
- Compatible with mineral, ester and PAG oils.
- Use adaptor hose to add A/C Leak Sealant to and R-134a A/C system.
Benefits:
- Excellent for R134a conversions (retro-fits)
- Reduces the possibilities of A/C problems and acts as insurance on used and later model cars.
- This product will not contaminate A/C recovery equipment.
- An inexpensive way to fix the majority of A/C system leaks.
- Able to discover larger A/C leaks with U/V (fluorescent green) dye.
- Product will not crystallise, gel up or set hard.
To be used with blue quick connect hose only
Datasheets(X)
Use for R-134a air conditioning system seals, gaskets and o-rings.
Shake can well. Screw the A/C Leak Sealant can onto the blue Quick-connect adaptor hose (available separately).
With the engine and air conditioner running (A/C on Max.) connect the Quick-connect adaptor hose to the low pressure side (suction side) service port. Do not connect to the high-side service port as the pressure may cause the can to burst resulting in serious injury. Turn the can upside down, and screw the tap on the Quick-connect adaptor hose clockwise to open the valve and dispense the product. When the can is empty, remove the quick-connect adaptor hose from the service port.
Run the vehicle for up to 30mins after application to allow product to circulate throughout the system. Wurth Leak Sealant will begin working within 1-2 hours of normal A/C operation to stop leaks at seals, gaskets, o-rings and hoses.
Contents | 120 ml |
Weight of content | 114 g |
Chemical basis | 0 - not applicable |
Colour | Yellow, Green |
Density | 0 g/cm³ |
Shelf life from production | 60 Month |
Last viewed
1/2" Pneumatic impact wrench DSS-1054Nm
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Brake cleaner Uni Rapid
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Specially fused alumina sanding tip, pink
Head For cable tie gun
Metric combination wrench with POWERDRIV®
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Medium-strength screw retainer
Finishing disc Useit® Superpad SG